modem 3G

[vahdani_d]

I use the Ubuntu 10
I bought a modem with a SIM card connected to the Internet to become mobile
The modem I installed Linux s file but when I install the file tells the kernel does not match and I'm the Download Now how do I download what I download and I eat Bdrdm please guide
Bought the hardware model revolves
D-link hspad atacard proprictary

[alexfish]

Need some info
can open up a terminal and post results of the following commands

uname -a

lsusb

ls -al /dev/serial/by-id

[vahdani_d]

sky@ubuntu:~$ uname -a
Linux ubuntu 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:34:50 UTC 2010 i686 GNU/Linux

sky@ubuntu:~$ lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 07d1:7e11 D-Link System
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

sky@ubuntu:~$ ls -al /dev/serial/by-id
ls: cannot access /dev/serial/by-id: No such file or directory

[alexfish]

hi

not sure about this device, or even if it will work
initially looking at the vendor ID this device seems fall into two classes , wilan and ethernet ,
so therefore indicating ,not a 3g device

are you connecting the device through a d-link router or connecting the device directly to the computer
can post the results of usb-devices from the terminal

usb-devices

will then look at the details, but not sure where heading on this one

alexfish

[vahdani_d]

sky@ubuntu:~$ usb-devices



T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6

D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1

P: Vendor=1d6b ProdID=0002 Rev=02.06

S: Manufacturer=Linux 2.6.35-22-generic ehci_hcd

S: Product=EHCI Host Controller

S: SerialNumber=0000:00:1d.7

C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA

I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub



T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0

D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1

P: Vendor=07d1 ProdID=7e11 Rev=00.00

S: Manufacturer=D-Link,Incorporated

S: Product=D-Link WCDMA Technologies MSM

S: SerialNumber=MF112DDLKD010000

C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA

I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

I: If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)



T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2

D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1

P: Vendor=1d6b ProdID=0001 Rev=02.06

S: Manufacturer=Linux 2.6.35-22-generic uhci_hcd

S: Product=UHCI Host Controller

S: SerialNumber=0000:00:1d.0

C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA

I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub



T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2

D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1

P: Vendor=1d6b ProdID=0001 Rev=02.06

S: Manufacturer=Linux 2.6.35-22-generic uhci_hcd

S: Product=UHCI Host Controller

S: SerialNumber=0000:00:1d.1

C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA

I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub



T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2

D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1

P: Vendor=1d6b ProdID=0001 Rev=02.06

S: Manufacturer=Linux 2.6.35-22-generic uhci_hcd

S: Product=UHCI Host Controller

S: SerialNumber=0000:00:1d.2

C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA

I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

[alexfish]

Ok

can try see if option driver will work with this device

sudo modeprobe -r option

sudo modeprobe option

then send the device id's to the new_id

echo "0x07d1 0x7e11" > /sys/bus/usb-serial/drivers/option1/new_id

or

echo "0x07d1 0x7e11" > /sys/module/option/drivers/usb-serial:option1/new_id

then see if registered

ls -al /dev/serial/by-id

if nothing happens will have to look further

[yktan]

Hi alexfish, I am having the same modem as vahdani_d and typing your commands (modprobe instead of modeprobe) manage to get my modem registered and I am able to dial with wvdial.

May I know what does that mean? Why doesn't it register automatically? How do I automate this part?

Thanks for your help!

[alexfish]

Hi

this is old thread needs to be closed

@ yktan , search through , threads by and posts by alexfish , recent

regards

alexfish

[lisati]

A lot can change in the space of a year. If you are having a similar problem, please start a new thread.

From the forum code of conduct:

If a post is older than a year or so and hasn't had a new reply in that time, instead of replying to it, create a new thread. In the software world, a lot can change in a very short time, and doing things this way makes it more likely that you will find the best information. You may link to the original discussion in the new thread if you think it may be helpful.

Thread closed.

[Elfy]

closed